Product Manual:

One-component, neutral-curing, room-temperature-curing silicone sealant, excellent adhesion, strong adhesion to most building materials and aluminum, and an excellent green product in China

The main purpose:
Suitable for all kinds of interior decoration. Installation of all kinds of aluminum alloy glass doors and windows, general purpose joint sealing.

Technical Parameters:

■Sag 0mm
■Elongation at break ≥320%
■ Dry time ≤ 20min
■ Strip load ≥ 33N
■Shore hardness 22-27A

Standards compliant:
GB/T14683-2003
Product specifications, storage:

■Packing specifications:
Net content: 300ml
■ Color: Transparent
■ Storage: Store in a cool, dry place at 27 °C for 9 months. During the warranty period, if there is a quality problem with this model, our company is responsible for the return.
Construction method:
■ First, use a grease-resistant solvent such as toluene or acetone to clean the surface of the interface and keep it dry.
■ Apply a low-viscosity tape to the part that needs to be protected, but do not touch the tape to the surface to be applied.
■ In the applicator gun, squeeze the glue to the interface to seal
■ When the glue is not cured, correct it immediately to achieve a beautiful appearance.
Use restrictions:
■ All materials that will ooze grease, plasticizers, certain unvulcanized or partially vulcanized rubber or tape, etc.
■ Impervious parts
■ The surface of the paint may fail to seal due to cracking or peeling of the paint film.
■ frosted or wet surface
■ will directly contact the surface of the food
■ Places subject to mechanical wear